Kia Cee'd: Panoramaroof / Panoramaroof Motor Repair procedures

Kia Cee'd JD Service Manual / Body Electrical System / Panoramaroof / Panoramaroof Motor Repair procedures

Inspection

1.	Disconnect the negative (-) battery terminal.

2.	Remove the roof trim assembly. (Refer to Body - "Roof Trim Assembly")

3.	Disconnect the connector (A).

4.	Remove the panoramaroof motor (B) after loosening 3 bolts.

Ground the terminals as below table, and check that the panoramaroof unit operates.

–	When inspecting the panoramaroof motor operation, panoramaroof motor and roller blind motor always should be connected.

Make these input tests at the connector. If any test indicates a problem, find and correct the cause, then recheck the system. If all the input tests prove OK, the panoramaroof motor must be faulty; replace it.

Terminal	Test condition	Test: Desired result
3	IG2 ON	Check for voltage to ground: There should be battery voltage.
1	Under all conditions	Check for continuity to ground: There should be continuity.
6	Under all conditions	Check for voltage to ground: There should be battery voltage.

Panoramaroof Switch Repair procedures

Inspection 1. Disconnect the negative (-) battery terminal. 2. Open the sunglass case cover from the overhead console then remove the ...

Roller Blind Motor Repair procedures

Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the roof trim assembly. (Refer to Body - "Roof Trim ...

Other information:

Kia Cee'd JD Service Manual: High Pressure Fuel Pump Repair procedures
Removal In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure fuel. So don’t do any repair w ...

Kia Cee'd JD Service Manual: Electronic Parking Brake (EPB) Repair procedures
Removal 1. Turn ignition OFF and disconnect the negative (-) battery cable. 2. Remove the floor console assembly. (Refer to Body - "Floor console assembly") 3. Disconnect the EPB cont ...