Kia Cee'd: SRSCM / PAB ON/OFF Switch Description and operation

Kia Cee'd JD Service Manual / Restraint / SRSCM / PAB ON/OFF Switch Description and operation

Description
Driver can control the passenger airbag operating Condition (Enable or Disable) by using this PAB ON/OFF switch.
Passenger Airbag (PAB) ON/OFF Switch is installed in the crash pad side cover.
Side Impact Sensor (SIS) Repair procedures
Removal Side Impact Sensor 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. ...

PAB ON/OFF Switch Components and components location
Components ...

Other information:

Kia Cee'd JD Service Manual: Special service tools
Special Service Tools   Tool Name / Number Illustration Description Engine support fixture (bar) 09200-3N000 Used for holding engine assembly when removing / installing transaxle Used ...

Kia Cee'd JD Service Manual: Auto Light Sensor Repair procedures
Inspection In the state of IGN1 ON, when multifunction switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor's input. The auto light control doesn't work if the pin sunlight s ...

© 2017-2022 www.kceed.com