Kia Cee'd: SRSCM / PAB ON/OFF Switch Components and components location

Kia Cee'd JD Service Manual / Restraint / SRSCM / PAB ON/OFF Switch Components and components location

Components

PAB ON/OFF Switch Description and operation
Description Driver can control the passenger airbag operating Condition (Enable or Disable) by using this PAB ON/OFF switch. Passenger Airbag (PAB) ON/OFF Switch is installed i ...

PAB ON/OFF Switch Repair procedures
Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes bef ...

Other information:

Kia Cee'd JD Service Manual: Troubleshooting
Troubleshooting Ignition System   Symptom Suspect Area Remedy Engine will not start or is hard to start (Cranks OK) Ignition lock switch Inspect ignition lock switch, or replace as requ ...

Kia Cee'd JD Owners Manual: Turn signals and lane change signals
The ignition switch must be on for the turn signals to function. To turn on the turn signals, move the lever up or down (A). Green arrow indicators on the instrument panel indicate which turn signal is operating. They will self-cancel after a turn is completed. If the indicator contin ...

© 2017-2022 www.kceed.com