Kia Cee'd: Operation of the parking assist system / Operating condition

• This system activates when the parking assist system button is pressed with the ignition switch ON.

Type A

The indicator of the parking assist system button turns on automatically and activates the parking assist system when you shift the gear to the R(Reverse) position or press the SPAS button. It will turn off automatically when you drive above 40 km/h(24.8 mph) except in the case when the parking assist system button is pressed with the ignition switch ON.

Type B

The indicator of the parking assist system button turns on automatically and activates the parking assist system when you shift the gear to the R(Reverse) position or press the SPAS button. It will turn off automatically when you drive above 40 km/h(24.8 mph).

✽ NOTICE

It may not operate if it’s distance from the object is already less than approximately 25 cm when the system is ON.

Operation of the parking assist system
...

Type of warning indicator and sound
✽ NOTICE The actual warning sound and indicator may differ from the illustration according to objects or sensor status. Do not wash the vehicle's sensor with high pressure water. Whe ...

Other information:

: Wipers
Wiper Precautions Do not operate the wipers on a dry windshield. This could scratch the glass or damage the wiper blades. Use the windshield washers before wiping a dry windshield. Fully defrost the windshield before you switch the windshield wipers on. Switch the windshield wipers off before ...

Kia Cee'd JD Service Manual: Description and operation
Warning Lamp Activation Warning Lamp Behavior after Ignition On As soon as the operating voltage is applied to the SRSCM ignition input, the SRSCM activates the warning lamp for a LED lamp check. The lamp shall turn on for 6 seconds during the initialization ...

© 2017-2026 www.kceed.com