Kia Cee'd: Turn signals and lane change signals / One-touch lane change function

To activate an one-touch lane change function, move the turn signal lever slightly and then release it. The lane change signals will blink 3 times.

You can inactivate one-touch lane change function in “Auto triple turn” of “User setting”. Refer to “User setting” in chapter 4.

✽ NOTICE

If an indicator flash is abnormally quick or slow, bulb may be burned out or have a poor electrical connection in the circuit.

Turn signals and lane change signals
The ignition switch must be on for the turn signals to function. To turn on the turn signals, move the lever up or down (A). Green arrow indicators on the instrument panel indicate which tur ...

Front fog light
Fog lights are used to provide improved visibility when visibility is poor due to fog, rain or snow, etc. The fog lights will turn on when the fog light switch (1) is turned on after the pos ...

Other information:

Kia Cee'd JD Owners Manual: Static bending light
While driving the corner, for your sight and safety, the static bending light turns on automatically. The system will operate automatically as follows: When vehicle speed is under 10km/h and steering wheel angle approximately 80 degrees. When vehicle speed is over 10km/h and ste ...

Kia Cee'd JD Owners Manual: Releasing the parking brake
To release the EPB (electric parking brake), press the EPB switch in the following condition: Have the ignition switch or engine start/stop button in the ON position. Depress the brake pedal. Make sure the brake warning light goes off. To release EPB (electric parking brake) a ...

© 2017-2023 www.kceed.com