Kia Cee'd: Lubrication System / Oil Pump Repair procedures

Removal and Installation
1.
Remove the timing chain cover.
(Refer to Timing System - "Timing Chain Cover")
2.
Remove the pump cover (A).
Tightening torque :
8.8 ~ 13.7N.m (0.9 ~ 1.4kgf.m, 6.5 ~ 10.1 lb-ft)
3.
Remove the inner rotor(A) and outer rotor(B).

4.
Install in the reverse order of removal.
Oil Pump Components and components location
Components   1.  Timing chain cover 2.  Inner rotor 3.  Outer rotor 4.  Pump cover ...

Oil Pressure Switch Repair procedures
Removal and Installation 1. Remove the under cover. 2. Remove the oil drain plug, and drain the oil into a container. ...

Other information:

Kia Cee'd JD Service Manual: Tire Repair procedures
   • Using tires and wheel other than the recommended sizes could cause unusual handling characteristics and poor vehicle control, resulting in a serious accident. ...

Kia Cee'd JD Owners Manual: Engine coolant temperature gauge
This gauge shows the temperature of the engine coolant when the ignition switch is ON. Do not continue driving with an overheated engine. If your vehicle overheats, refer to “If the engine overheats” in chapter 6. CAUTION If the gauge pointer moves beyond the normal range area tow ...

© 2017-2025 www.kceed.com