Kia Cee'd: Lubrication System / Oil Pan Repair procedures
| 1. |
Remove the under covers.
|
| 3. |
Using the SST(09215-3C000) and remove the oil pan.
| •
|
Insert the SST between the oil pan and the ladder frame
by tapping it with a plastic hammer in the direction
of ① arrow.
|
| •
|
After tapping the SST with a plastic hammer along the
direction of ② arrow around more than 2/3 edge of the
oil pan, remove it from the ladder frame.
|
| •
|
Do not turn over the SST abruptly without tapping. It
be result in damage of the SST.
|
|
|
| 1. |
Install the oil pan.
| (1) |
Using a razor blade and gasket scraper, remove all the old packing
material from the gasket surfaces.
|
Check that the mating surfaces are clean and dry before
applying liquid gasket.
|
|
| (2) |
Apply liquid gasket as an even bead, centered between the edges
of the mating surface.
|
Liquid gasket : TB 1217H or LOCTITE 5900H
|
|
• |
To prevent leakage of oil, apply liquid gasket
to the inner threads of the bolt holes.
|
|
• |
Do not install the parts if five minutes or
more have elapsed since applying the liquid
gasket.
Instead, reapply liquid gasket after removing
the residue.
|
|
• |
After assembly, wait at least 30 minutes before
filling the engine with oil.
|
|
|
| (3) |
Install the oil pan (A) with the bolts.
Uniformly tighten the bolts in several passes.
|
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
|
|
|
| 2. |
Refill the engine oil.
|
Capacity
Total : 4.0L (4.22 U.S.qt., 3.51 lmp.qt., 1.05 U.S.gal.)
Oil pan : 3.3L (3.48 U.S.qt., 2.90 lmp.qt., 0.87 U.S.gal.)
Drain and refill in cluding oil filter :
3.6L (3.80 U.S.qt., 3.16 lmp.qt., 0.95 U.S.gal.)
|
|
| 3. |
Installation is in the reverse order of removal.
|
Components
1. Gasket
2. Oil screen
3. Oil pan
4. Drain plug gasket
5. Drain plug
...
Removal and Installation
1.
Remove the oil lever gauge(A).
Tightening torque:
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
...
Other information:
Kia Cee'd JD Owners Manual: Closing the hood
1. Before closing the hood, check the following:
All filler caps in engine compartment
must be correctly installed.
Gloves, rags or any other combustible
material must be removed
from the engine compartment.
2. Return the support rod to its clip to
prevent it from rattling.
3. L ...
Kia Cee'd JD Owners Manual: Snow tires
If you mount snow tires on your vehicle,
make sure they are radial tires of the
same size and load range as the original
tires. Mount snow tires on all four wheels
to balance your vehicle’s handling in all
weather conditions. Keep in mind that the
traction provided by snow tires on dry ...
Oil Pan Components and components location
Oil Level Gauge & Pipe Repair procedures