Kia Cee'd: Manual Transaxle System / Neutral Switch Repair procedures

Inspection
1.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner)
2.
Disconnect the neutral switch connector (A).

3.
Check the continuity between power terminal and signal terminal.

Removal
1.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner)
2.
Disconnect the neutral switch connector (A).

3.
Remove the neutral switch.
Tightening torque :
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)
Installation
1.
Install in the reverse order of removal
  
The neutral switch must be replaced with new one.
Neutral Switch Description and operation
Description • Signal of neutral switch is transmitted to the ECM in the neutral state. • This signal is blocked when gear changed ...

Manual Transaxle Control System
...

Other information:

Kia Cee'd JD Service Manual: Repair procedures
Removal    • Put on gloves to protect your hands.    • Use seat ...

Kia Cee'd JD Service Manual: Crankshaft Position Sensor (CKPS) Description and operation
Description Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engine may stop because of CKPS signal missing. This sensor is installed in ladder fra ...

© 2017-2024 www.kceed.com