Description |
• |
Signal of neutral switch is transmitted to the ECM in the neutral state.
|
• |
This signal is blocked when gear changed.
|
• |
When the signal is blocked, The ECM controls the fuel injection quantity
mapping value for 1st gear so that vehicle can start properly.
|
Kia Cee'd JD Service Manual: Parking Brake Lever Repair procedures
Removal
The parking brake cables must not be bent or distorted. This will lead
to stiff operation and premature failure.
1.
Remove the floor console assembly.
(Refer t ...
Kia Cee'd JD Service Manual: Power Seat Control Switch Repair procedures
Inspection
1.
With the power seat switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the power seat switch.
A : Power seat control switch
B : Lumbar support swi ...