Kia Cee'd: Interior Trim / Luggage Side Trim Repair procedures

Replacement
[5Door]
  
Put on gloves to protect your hands.
  
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the rear wheel house trim.
(Refer to Interior Trim - "Rear Wheel House Trim")
2.
Remove the rear transverse trim.
(Refer to Interior Trim - "Rear Transverse Trim")
3.
Using a screwdriver or remover, remove the luggage lamp (A).
4.
Disconnect the luggage lamp connector (B).

5.
After loosening the mounting bolts, screw, clips, then remove the luggage side trim (A).

6.
Install in the reverse order of removal.
  
Replace any damaged clips.
[3Door]
  
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
Put on gloves to protect your hands.
1.
Remove the rear wheel house trim.
(Refer to Interior Trim - "Rear Wheel House Trim")
2.
Remove the rear transverse trim.
(Refer to Interior Trim - "Rear Transverse Trim")
3.
After loosening the mounting bolt, screw, clips, then remove the luggage side trim (A).

4.
Disconnect the luggage lamp connector (A).

5.
Install in the reverse order of removal.
  
Replace any damaged clips.
Make sure the connector is plugged in properly.
Luggage Side Trim Components and components location
Component Location [5Door]   1. Luggage side trim [3Door]   1. Luggage side trim ...

Rear Pillar Trim Components and components location
Component Location [5Door]   1. Rear pillar trim [3Door]   1. Rear pillar trim ...

Other information:

Kia Cee'd JD Owners Manual: 6. Smart Parking Assist System completed
Complete parking your vehicle according to the instructions on the LCD display. If required, manually control the steering wheel and complete parking your vehicle. ✽ NOTICE The brake pedal must be depressed by the driver while parking your vehicle. The system may be cancelled in the b ...

Kia Cee'd JD Owners Manual: Underbody maintenance
Corrosive materials used for ice and snow removal and dust control may collect on the underbody. If these materials are not removed, accelerated rusting can occur on underbody parts such as the fuel lines, frame, floor pan and exhaust system, even though they have been treated with rus ...

© 2017-2024 www.kceed.com