Kia Cee'd: Lighting / Lighting control
The light switch has a Headlight and a Parking light position.
To operate the lights, turn the knob at the end of the control lever to one of the following positions:
(1) OFF position
(2) Position light position
(3) Headlight position
(4) Auto light position (if equipped)
- Position light position
- Headlight position
- Auto light/AFLS position
- High - beam operation
- Flashing headlights
Static bending light
While driving the corner, for your sight
and safety, the static bending light turns
on automatically. The system will operate
automatically as follows:
When vehicle speed is under 10km/h
...
Position light position
When the light switch is in the position
light position, the tail, position, license
and instrument panel lights are ON. ...
Other information:
Kia Cee'd JD Owners Manual: Auto stop indicator
This indicator will illuminate when the
engine enters the Idle Stop mode of the
ISG (Idle Stop and Go) system.
When the automatic starting occurrs, the
auto stop indicator on the cluster will
blink for 5 seconds.
For more details, refer to the ISG (Idle
Stop and Go) system in chapter 5 ...
Kia Cee'd JD Service Manual: Head Lamps Repair procedures
Inspection
1.
Check-points upon head lamp failure (HID)
(1)
Check the battery voltage. (Low beam will be on when the battery
voltage above 9V.)
(2)
Check the fuse and relay.
...
