Kia Cee'd: Features of your vehicle / Lighting
- Battery saver function
- Headlamp delay function
- Headlight (Headlamp) welcome function
- Static bending light
- Lighting control
- High Beam Assist (HBA)
- Operating condition
- Turn signals and lane change signals
- Front fog light
- Rear fog light
- Daytime running light
- Headlight leveling device
- Adaptive Front Lighting System (AFLS)
Hazard warning flasher
The hazard warning flasher should be
used whenever you find it necessary to
stop the vehicle in a hazardous location.
When you must make such an emergency
stop, always pull off the road as f ...
Battery saver function
The purpose of this feature is to prevent
the battery from being discharged.
The system automatically
turns off the parking lights when the
driver removes the ignition key (Smart
key ...
Other information:
Kia Cee'd JD Owners Manual: Auto stop
To stop the engine in idle stop mode
1. Decrease the vehicle speed to less
than 5 km/h (3 mph).
2. Shift into N (Neutral) position.
3. Release the clutch pedal.
The engine will stop and the green AUTO
STOP() indicator on the instrument
cluster will illuminate.
Also, a message "Auto St ...
: Garage Door Opener Limitations. Programming the Garage Door Opener to Your Hand-Held Transmitter
Garage Door Opener Limitations
Canadian radio-frequency laws require
transmitter signals to time-out (or quit)
after several seconds – which may not be
long enough for HomeLink to pick up the
signal.
U.S. gate operators time-out in the same
manner.
Note: If programming a garage door opener
o ...
