Kia Cee'd: Lane Departure Warning System (LDWS) / Lane Departure Warning System (LDWS) Unit Repair procedures

Kia Cee'd JD Service Manual / Body Electrical System / Lane Departure Warning System (LDWS) / Lane Departure Warning System (LDWS) Unit Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the mirror wiring cover (A).

3.	Remove the LDWS unit cover (A).

4.	Disconnect the LDWS unit connector (A).

5.	Remove the LDWS unit (A) after widening the mounting clips.

Installation

1.	Install the LDWS unit.

Install the LDWS unit cover.

After replacing the LDWS unit, It is necessary to operate the Variant Coding procedure and Calibration procedure.

a.	Using the GDS tool, select the Variant Coding menu of LDWS and select the RHD or LHD.

b.	Using the GDS tool, operate the Calibration menu of LDWS.

c.	Ignition OFF and ON.

d.	Check the normal operation of LDWS.

3.	Check LDWS system operation.

Lane Departure Warning System (LDWS) Unit Components and components location

Components ...

Blind Spot Detection system

...

Other information:

Kia Cee'd JD Service Manual: Front Seat Shield Inner Cover Components and components location
Component Location 1. Front seat shield inner cover ...

Kia Cee'd JD Owners Manual: With the door handle
Driver’s door and front passanger’s door (if equipped) If the inner door handle is pulled when the door is locked, the door will unlock and open. Rear door (if equipped) If the inner door handle is pulled once when the door is locked, the door will unlock. If the inner door handl ...