Kia Cee'd: Engine Control System / Knock Sensor (KS) Specifications

 

Knock Sensor (KS) Description and operation

Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses ...

Knock Sensor (KS) Schematic diagrams

Circuit Diagram ...

Other information:

Kia Cee'd JD Owners Manual: If the engine will not start
If engine doesn't turn over or turns over slowly 1. If your vehicle has an automatic transaxle, be sure the shift lever is in N (Neutral) or P (Park) and the emergency brake is set. 2. Check the battery connections to be sure they are clean and tight. 3. Turn on the interior light. If t ...

Kia Cee'd JD Service Manual: Repair procedures
Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, then put a finger over the open end ...