Kia Cee'd: Engine Control System / Intake Air Temperature Sensor (IATS) Description and operation

Kia Cee'd JD Service Manual / Fuel System / Engine Control System / Intake Air Temperature Sensor (IATS) Description and operation

Description
Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure Sensor and detects the intake air temperature.
To calculate precise air quantity, correction of the air temperature is needed because air density varies according to the temperature. So the ECM uses not only MAPS signal but also IATS signal. This sensor has a Negative Temperature Coefficient (NTC) Thermister and it's resistance changes in reverse proportion to the temperature.

Manifold Absolute Pressure Sensor (MAPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. ...

Intake Air Temperature Sensor (IATS) Specifications
Specification   Temperature Resistance (kΩ) °C °F -40 -40 40.93 ~ 48.35 ...

Other information:

Kia Cee'd JD Owners Manual: Aiming point
H1 : Height between the head lamp bulb center and ground (Low beam) H2 : Height between the head lamp bulb center and ground (High beam) H3 : Height between the fog lamp bulb center and ground W1 : Distance between the two head lamp bulbs centers (Low beam) W2 : Distance between the two head l ...

Kia Cee'd JD Service Manual: Rear Upper Arm Repair procedures
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear wheel and tire (A) from rear hub. Tightening torque: 88.2 ~ 1 ...

© 2017-2023 www.kceed.com