Kia Cee'd: Blower / Intake Actuator Description and operation

Kia Cee'd JD Service Manual / Heating,Ventilation, Air Conditioning / Blower / Intake Actuator Description and operation

Description
The intake actuator is located at the blower unit. It regulates the intake door by the signal from control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.
Climate Control Air Filter Repair procedures
Replacement 1. Open the glove box. 2. Disconnect the stopper (B) from the glove box (A). 3. Disco ...

Intake Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that t ...

Other information:

Kia Cee'd JD Owners Manual: START/RUN
With manual transaxle To start the engine, depress the clutch pedal and brake pedal, then press the engine start/stop button with the shift lever in the N (Neutral) position. With automatic transaxle/DCT To start the engine, depress the brake pedal and press the engine start/stop butt ...

Kia Cee'd JD Service Manual: Smart Key Unit Components and components location
Component Connector Pin Information   No. Connector A(26 pins) No. Connector B(16 pins) No. Connector C(22 pins) 1 Battery power load 1 CAN H ...

© 2017-2024 www.kceed.com