Kia Cee'd: Dual Clutch Transmission Control System / Input Speed Sensor 2 Schematic diagrams

Input Speed Sensor 2 Specifications

Specification Input Speed Sensor 2 ▷ Type: Hall effect sensor ▷ Specifications   Item Specifications Output voltage (V) ...

Input Speed Sensor 2 Repair procedures

Inspection Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor. Removal 1. Turn off the ignition switch and then disconnect the batte ...

Other information:

Kia Cee'd JD Service Manual: Temperature Control Actuator Description and operation
Description The heater unit includes mode control actuator and temperature control actuator. The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. Signal from the control unit adjusts the position of the ...

Kia Cee'd JD Service Manual: BJ Boot Repair procedures
Replacement 1. Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft”) 2. Remove the TJ joint assembly. (Refer to Driveshaft Assembly - “TJ Joint”) 3. Rem ...