Kia Cee'd: Dual Clutch Transmission Control System / Input Speed Sensor 1 Specifications

Specification
Input Speed Sensor 1
▷ Type: Hall effect sensor
▷ Specifications
 
Item
Specifications
Output voltage (V)
Low
0.7
High
1.4

Input Speed Sensor 1 Description and operation
Description The input shaft speed sensor is important in that it detects the input shaft RPM and sends this information to the Transmission Control Module (TCM). It provides i ...

Input Speed Sensor 1 Schematic diagrams
Schematic Diagrams ...

Other information:

Kia Cee'd JD Service Manual: Front Seat Belt Pretensioner Repair procedures
Replacement [5Door, Waggon]    • When installing the belt, make sure not to damage the pretensioner. 1. Remove the center pi ...

Kia Cee'd JD Service Manual: Auto Light Sensor Repair procedures
Inspection In the state of IGN1 ON, when multifunction switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor's input. The auto light control doesn't work if the pin sunlight s ...

© 2017-2026 www.kceed.com