Kia Cee'd: Engine Control System / Injector Specifications

Specification
 
Item
Specification
Coil Resistance (Ω)
1.5 ± 5%[20°C(68°F)]

Injector Description and operation
Description The GDI injector is similar to a standard injector, but sprays fuel at a much higher pressure directly into the combustion chamber and has a swirl disc to get the fue ...

Injector Troubleshooting
Signal Waveform The three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle ...

Other information:

Kia Cee'd JD Service Manual: Troubleshooting
Engine Overheat Troubleshooting   Inspection Remedy Visual inspection Inspect for shortage of coolant in reservoir tank . Reinspect after replenishing coolant. Inspect for coolant pollution after ...

Kia Cee'd JD Service Manual: Blower Resistor (Manual) Repair procedures
Inspection 1. Measure the resistance between the terminals. 2. If the measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor.) Replacement ...

© 2017-2026 www.kceed.com