Kia Cee'd: Engine Control System / Injector Description and operation

The GDI injector is similar to a standard injector, but sprays fuel at a much higher pressure directly into the combustion chamber and has a swirl disc to get the fuel swirling as it exits the nozzle. This aids in atomization of the fuel.The ECM controls both the feed circuits (high side) to feed voltage to the injectors and the ground circuits (low side) to energize the injectors. Also, the feed for 2 injectors comes from the same driver set. As the ignition coils are paired with cylinders (1-4 and 2-3), the injectors are also set up in pairs.

Accelerator Position Sensor (APS) Repair procedures

Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measur ...

Injector Specifications

Specification   Item Specification Coil Resistance (Ω) 1.5 ± 5％[20°C(68°F)] ...

Other information:

Kia Cee'd JD Owners Manual: 6. Smart Parking Assist System completed
Complete parking your vehicle according to the instructions on the LCD display. If required, manually control the steering wheel and complete parking your vehicle. ✽ NOTICE The brake pedal must be depressed by the driver while parking your vehicle. The system may be cancelled in the b ...

Kia Cee'd JD Service Manual: EBD(Electronic Brake-force Distribution) Description and operation
Description The EBD system (Electronic Brake force Distribution) as a sub-system of the ABS system is to control the effective adhesion utilization by the rear wheels. It further utilizes the efficiency of highly developed ABS equipment by controlling the slip of the ...