Kia Cee'd: Dual Clutch Transmission Control System / Inhibitor Switch Specifications

Specification
▷ Type: Single signal output type
▷ Specifications
 
Item
Specifications
Output type
Combined signal output
Input voltage (V)
12

Inhibitor Switch Description and operation
Description The inhibitor switch is mounted on the transmission case. It includes the electric switch plate circuit and is directly connected with the transmission lever via tran ...

Inhibitor Switch Schematic diagrams
Schematic Diagrams ...

Other information:

Kia Cee'd JD Service Manual: Accelerator Position Sensor (APS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output voltage of the APS 1 and 2 at C.T and W.O.T. Specificati ...

Kia Cee'd JD Owners Manual: Headlight (Low, Non-HID Type)
Follow the steps 1 to 7 from the previous page. 8. Remove the cover by turning it counterclockwise. 9. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 10. Pull the bulb out of the socket. 11. ...

© 2017-2024 www.kceed.com