Kia Cee'd: Troubleshooting / In car sensor (DATC only) Description and operation

Kia Cee'd JD Service Manual / Heating,Ventilation, Air Conditioning / Troubleshooting / In car sensor (DATC only) Description and operation

Description
The In-car air temperature sensor is built in the heater & A/C control unit.
The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to the heater control unit and according to this signal the control unit regulates the in-car temperature to the intended value.

Evaporator Temperature Sensor Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. ...

Photo Sensor Description and operation
Description The photo sensor is located at the center of the defrost nozzles. The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation recei ...

Other information:

Kia Cee'd JD Owners Manual: Changing a tire with TPMS
If you have a flat tire, the low Tire Pressure and Position telltales will come on. We recommend that the system be checked by an authorized Kia dealer. CAUTION We recommend that you use the sealant approved by Kia. The sealant on the tire pressure sensor and wheel shall be eleminated ...

Kia Cee'd JD Owners Manual: Ashtray
■ Type A ■ Type B To use the ashtray, open the cover. (Type B) To clean or empty the ashtray, pull it out. WARNING - Ashtray use Do not use the vehicle’s ashtray as a waste receptacle. Putting lit cigarettes or matches in an ashtray with other combustible materials may ...

© 2017-2022 www.kceed.com