Kia Cee'd: IMS (Integrated Memory) / IMS Power Seat Control Repair procedures

Kia Cee'd JD Service Manual / Body Electrical System / IMS (Integrated Memory) / IMS Power Seat Control Repair procedures

Inspection

1.	Disconnect the IMS control switch connector.

2.	With the power IMS control switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the IMS control switch.

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the front door trim panel. (Refer to Body - "Front Door Trim")

3.	After removing the mounting screws and switch connector (B), then remove the IMS control switch bracket (A) from the front door trim panel.

Installation

–	Make sure that the IMS control switch connectors and related connectors are plugged in properly.

–	Check the IMS control switch operates normally.

1.	Connect the connectors and reassemble the IMS control switch.

2.	Reassemble the seat side cover.

IMS Power Seat Control Schematic diagrams

Circuit diagram ...

IMS Control Switch Schematic diagrams

Circuit diagram ...

Other information:

Kia Cee'd JD Owners Manual: How the system works (Exit mode)
The Exit Mode operates in the below condition: When vehicle speed is below 5 km/h the first time after the engine has been started. After parallel parking is completed with the Smart Parking Assist System. 1. Activate the Smart Parking Assist System The shift lever should be p ...

Kia Cee'd JD Service Manual: Oil Pump Components and components location
Components 1. Timing chain cover 2. Inner rotor 3. Outer rotor 4. Pump cover ...