Kia Cee'd: Immobilizer System / Immobilizer Control Unit Repair procedures

Kia Cee'd JD Service Manual / Body Electrical System / Immobilizer System / Immobilizer Control Unit Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the crash pad lower panel. (Refer to Body - " Crash Pad Lower Panel")

3.	Disconnect the connector of the immobilizer unit and then remove the immobilizer unit (A) after loosening a nut and a bolt.

Installation

1.	Install the immobilizer control unit after connecting the unit connector.

2.	Install the crash pad lower panel.

Repair procedures

Teaching Procedures 1. Key Teaching Procedure Key teaching must be done after replacing a defective PCM (ECM) or when providing additional keys to the ve ...

Antenna Coil Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the steering column shroud panel. (Refer to Body - "Cra ...

Other information:

Kia Cee'd JD Service Manual: Rear Door Side Weatherstrip Repair procedures
Replacement 1. Detach the clips, then remove the rear door side weatherstrip (A). 2. Install in the reverse order of removal. ...

Kia Cee'd JD Service Manual: Variable Intake Solenoid (VIS) Valve Description and operation
Description Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold. The VIS valve controls the vacuum modulator which activates a valve in the intake manifold. The ECM opens or closes this valve according to engine condition (Refer to below table). ...