Kia Cee'd: LCD display information / Illumination intensity

The illumination intensity of the instrument panel is shown when adjusting it with the illumination control switch.

For more details, refer to “Instrument panel illumination” in chapter 4.

Sunroof open
If driver removes the ignition key (Smart key : turns off the engine) and opens the driver-side door when the sunroof is not fully closed, warning message will appear on the LCD display. Als ...

Turn on "FUSE SWITCH" (mode switch)
The notice appears to inform the driver to turn on the fuse switch in the instrument panel under the steering wheel. For more details, refer to “Fuses” in chapter 7. ...

Other information:

Kia Cee'd JD Service Manual: Receiver-Drier Repair procedures
Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with a L wrench (A). Tightening torque : 9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) ...

Kia Cee'd JD Service Manual: Accelerator Position Sensor (APS) Specifications
Specification   Accelerator Position Output Voltage (V) [Vref=5V] APS1 APS2 C.T 0.7 ~ 0.8 0.29 ~ 0.46 W.O.T 3.85 ~ 4.35 1.93 ~ 2.18 ...

© 2017-2024 www.kceed.com