LOCK
The steering wheel locks to protect against theft. The ignition key can be removed only in the LOCK position. When turning the ignition switch to the LOCK position, push the key inward at the ACC position and turn the key toward the LOCK position.
ACC (Accessory)
The steering wheel is unlocked and electrical accessories are operative.
✽ NOTICE
If difficulty is experienced turning the ignition switch to the ACC position, turn the key while turning the steering wheel right and left to release the tension.
ON
The warning lights can be checked before the engine is started. This is the normal running position after the engine is started.
Do not leave the ignition switch ON if the engine is not running to prevent battery discharge.
START
Turn the ignition key to the START position to start the engine. The engine will crank until you release the key; then it returns to the ON position. The brake warning lamp can be checked in this position.
WARNING - Ignition key
Kia Cee'd JD Owners Manual: Rear parking assist system precautions
The rear parking assist system may
not sound sequentially depending on
the speed and shapes of the objects
detected.
The rear parking assist system may
malfunction if the vehicle bumper
height or sensor installation has been
modified or damaged. Any non-factory
installed eq ...
Kia Cee'd JD Owners Manual: Lap/shoulder belt
Height adjustment (5 Door and Wagon)
■ Front seat
You can adjust the height of the shoulder
belt anchor to one of 4 positions for maximum
comfort and safety.
The height of the adjusting seat belt
should not be too close to your neck.You
will not be getting the most effective protectio ...