Kia Cee'd: Ignition System / Ignition Coil Repair procedures

Removal
1.
Disconnect the battery nagative terminal.
2.
Remove the engine cover.
3.
Disconnect the ignition coil connector (A).

  
When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).

4.
Remove the ignition coil (A).

Installation
1.
Install in the reverse order of removal.
Ignition coil installation bolts: 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 Ib-ft)
Inspection
1.
Measure the primary coil resistance between terminals (+) and (-).

Standard value: 0.75Ω ± 15%
Ignition Coil Schematic diagrams
Circuit Diagram ...

Spark Plug Description and operation
Description A spark plug is a device for delivering electric current from an ignition system to the combustion chamber of a spark-ignition engine to ignite the compressed fuel/ai ...

Other information:

Kia Cee'd JD Service Manual: Rear Door Belt Outside Weatherstrip Repair procedures
Replacement 1. Pull down rear door window glass by pressing the power window glass switch. 2. After loosening the mounting screws, then remove the rear door belt outside weatherstrip (A). 3. ...

Kia Cee'd JD Service Manual: Alternator Repair procedures
Removal 1. Disconnect the battery negative terminal. 2. Loosen the mounting bolts (A) and then, turn the adjusting bolt (B) clockwise to loosen tension. 3. Remove the drive belt (A). ...

© 2017-2023 www.kceed.com