Kia Cee'd: Fuses and Relays / ICM (Integrated Circuit Module) Relay Box Repair procedures
Kia Cee'd JD Service Manual / Body Electrical System / Fuses and Relays / ICM (Integrated Circuit Module) Relay Box Repair procedures
| Inspection |
| 1. |
The ICM (Integrated Circuit Module) can be diagnosed by using the GDS
more quickly.
The BCM communicates with the GDS and then reads the relay value and
drives the actuator.
|
| 2. |
To diagnose the ICM relay function, select the menu of vehicle model
and body control module.
|
| 3. |
Select "Input/output monitoring", if you want to check current data
of body network system. It provides input/output status of each module.
|
| 4. |
If you will check each module data operation forcefully, select "Actuation
test".
|
ICM (Integrated Circuit Module) Relay Box Description and operation
Description
The ICM is united many kinds of relays and installed inside the driver crash
pad.
...
Other information:
: Adjusting the Seatbelts During Pregnancy
WARNING: Always ride and drive
with your seatback upright and properly
fasten your seatbelt. Fit the lap portion
of the seatbelt snugly and low across
the hips. Position the shoulder portion of
the seatbelt across your chest. Pregnant
women must follow this practice. See
the following figure. ...
Kia Cee'd JD Owners Manual: Air bag warning light
The purpose of the air bag warning light
in your instrument panel is to alert you of
a potential problem with your air bag -
Supplemental Restraint System (SRS).
When the ignition switch is turned ON,
the warning light should illuminate for
approximately 6 seconds, then go off.
Have t ...
© 2017-2026 www.kceed.com
