Kia Cee'd: Smart Parking Assist System (SPAS) / How the system works (Parking mode)
1.Activate the Smart Parking Assist System
The shift lever should be placed in D (Drive) or N(Neutral).
2.Select parking assist mode
3.Search for parking space (slowly move forward.)
4.Search complete (automatic search by sensor.)
5.Steering wheel control
(1) Shift according to the instruction on
the LCD display.
(2) Drive slowly with the brake pedal
applied.
6.Smart Parking Assist System complete
7.If necessary, manually adjust position of vehicle.
✽ NOTICE
- Before activating the system check if the conditions are possible to use the system.
- For your safety, always apply the brake pedal except for when driving.
- 1. Activate Smart Parking Assist System
- 2. Select parking assist mode
- 3. Search for parking space (optional)
- 4. Search complete
- 5. Steering wheel control
- 6. Smart Parking Assist System completed
Non-operating condition
Never use the Smart Parking Assist
System in the below conditions.
Curved parking space
Inclined roads
A vehicle loaded with longer or wider
cargo compared to the vehicle
Diagonal parki ...
1. Activate Smart Parking Assist
System
Press the Smart Parking Assist
System button (the button indicator will
illuminate).
The Parking Assist System will be activated
(the button indicator will illuminate).
A warning so ...
Other information:
Kia Cee'd JD Service Manual: TPMS Sensor Repair procedures
Removal
1.
Remove the valve core and deflate the tire.
2.
Remove the side of the tire bead area from the wheel using tire changing
machine .
...
: Blind Spot Information System Requirements. Switching Blind Spot Information System On and Off
Blind Spot Information System Requirements
Blind spot information system turns on
when all the following occur:
You start your vehicle.
You shift into drive (D).
The vehicle speed is greater than
6 mph (10 km/h).
Switching Blind Spot Information System On and Off
To switch blind spot informa ...
