Kia Cee'd: Hood / Hood Latch Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Repair procedures

Replacement

1.	Remove the front bumper cover. (Refer to Front Bumper - "Front Bumper Cover")

Remove the hood latch (A) mounting bolts.

Tightening torque :

7.8 ~ 11.8N.m (0.8 ~ 1.2kgf.m, 5.8 ~ 8.7 lb-ft)

3.	Disconnect the hood latch cable (A) and remove the hood latch (B).

Install in the reverse order of removal.

•	Make sure the hood latch release cable is connected properly.

•	Make sure the hood locks/unlocks and opens/closes properly.

•	Adjust the latch alignment.

Hood Latch Components and components location

Component Location 1. Hood latch assembly ...

Tail Gate

...

Other information:

: Cleaning the Exterior
Cleaning the Exterior Precautions Immediately remove fuel spillages, AdBlue residuals, bird droppings, insect deposits and road tar. These may cause damage to your vehicle’s paintwork or trim over time. Remove any exterior accessories, for example antennas, before entering a car wash. Cleanin ...

Kia Cee'd JD Service Manual: Water pump Troubleshooting
Troubleshooting Symptoms Possible Causes Remedy Coolant leakage • From the bleed hole of the water pump Visually check • ...