Kia Cee'd: Lighting System / High Mounted stop lamp Repair procedures

Kia Cee'd JD Service Manual / Body Electrical System / Lighting System / High Mounted stop lamp Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear spoiler assembly (A).
(Refer to Body - "Rear Spoiler")

3.
Remove the high mounted stop lamp (A) after removing the mounting screws.

Installation
1.
Install the high mounted stop lamp.
2.
Install the rear spoiler.
3.
Connect the negative (-) battery terminal.
Rear Fog Lamps Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the lighting switch of the multifunction switch. (Refer t ...

Rear Combination Lamp Repair procedures
Removal [5Door] Rear Combination lamp (Inside) 1. Disconnect the negative (-) battery terminal. 2. Remove the rear comb ...

Other information:

Kia Cee'd JD Owners Manual: Starting the engine
WARNING Always wear appropriate shoes when operating your vehicle. Unsuitable shoes (high heels, ski boots,etc.) may interfere with your ability to use the brake and accelerator pedal, and clutch (if equipped). ✽ NOTICE - Kick down mechanism If your vehicle is equipped with a kick d ...

Kia Cee'd JD Owners Manual: Pre-tensioner seat belt
Your vehicle is equipped with driver's and front passenger's pre-tensioner seat belts. The purpose of the pre-tensioner is to make sure that the seat belts fit tightly against the occupant's body in certain frontal collisions. The pre-tensioner seat belts may be activated in crashes wh ...

© 2017-2023 www.kceed.com