Kia Cee'd: Warnings and indicators (Instrument cluster) / High beam assist indicator
This warning light illuminates :
- When the high-Beam is on with the light switch in the AUTO light position.
- If your vehicle detects oncoming or preceding vehicles, the high beam assist system will switch the high beam to low beam automatically.
❈For more details, refer to “High beam assist” in chapter 4.
High beam indicator
This indicator illuminates when the headlights
are on and in the high beam position
or when the turn signal lever is pulled
into the Flash-to-Pass position. ...
Adaptive Front
Lighting System (AFLS)
malfunction indicator
If the AFLS malfunction indicator illuminates,
the AFLS is not working properly.
Drive to the nearest safe location and
restart the engine. If the indicator continuously
remains on, we recom ...
Other information:
Kia Cee'd JD Owners Manual: Windshield wipers (front)
Operates as follows when the ignition
switch is turned ON.
: For a single wiping cycle, move
the
lever to this position and release it.
The wipers will operate continuously if
the lever is held in this position.
O : Wiper is not in operation
--- :Wiper operates intermittently at the
s ...
Kia Cee'd JD Service Manual: CVVT Oil Control Valve (OCV) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OCV connector.
3.
Measure resistance between the OCV terminals 1 and 2.
4.
Check that the resistance is within t ...
