Kia Cee'd: Manual climate control system / Heating and air conditioning
1. Start the engine.
2. Set the mode to the desired position.
To improve the effectiveness of heating
and cooling:
- Heating: 
- Cooling: 
3. Set the temperature control to the desired position.
4. Set the air intake control to the outside (fresh) air or recirculated position.
5. Set the fan speed control to the desired speed.
6. If air conditioning is desired, turn the air conditioning system on.
- Mode selection
- Temperature control
- Air intake control
- Fan speed control
- To turn off the blowers
- Air conditioning
Manual climate control system
1. Fan speed control knob
2. Air conditioning button
3. Rear window defroster button
4. Mode selection knob
5. Air intake control button
6. Temperature control knob
CAUTION
Operating the blow ...
Mode selection
The mode selection knob controls the
direction of the air flow through the ventilation
system.
Air can be directed to the floor, dashboard
outlets, or windshield. Six symbols
are used to re ...
Other information:
Kia Cee'd JD Service Manual: Repair procedures
General Inspection
After or before servicing the EPS system, perform the troubleshooting and test
procedure as follows. Compare the system condition with normal condition in
the table below and if abnormal symptom is detected, perform necessary remedy
and inspection.
&nb ...
Kia Cee'd JD Owners Manual: Driver's and passenger's front air
bag
■ Driver’s front air bag
Your vehicle is equipped with a
Supplemental Restraint (Air Bag) System
and lap/shoulder belts at both the driver
and passenger seating positions.
The indications of the system's presence
are the letters "AIR BAG" embossed on
the air bag pad cover in the st ...
