Kia Cee'd: Steering wheel / Heated Steering wheel Repair procedures

Kia Cee'd JD Service Manual / Steering System / Steering wheel / Heated Steering wheel Repair procedures

Inpection

Measure a resistance of NTC and Heated pad.

–	NTC resistance(Black / Yellow, Black) - 10.0 kΩ ± 10% (25°C)

–	Heated pad resistance (Yellow, Black) - 1.6 ~ 2.0 Ω ± 10%

Measure a temperature.

–	The temperature of wheel surface grip must rise from -20°C to 20°C within 6 minute

–	The temperature of wheel surface grip must keep 38°C ± 4°C after 25 minute

–	At that time switch on, all measure point (1~8)

Heated Steering wheel Schematic diagrams

System Circuit Diagram Terminal Function Housing Pin Function Wire color Pad A ...

Flex Steering Components and components location

Components Location 1. Flex steering switch ...

Other information:

Kia Cee'd JD Service Manual: In car sensor (DATC only) Description and operation
Description The In-car air temperature sensor is built in the heater & A/C control unit. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside tempera ...

Kia Cee'd JD Service Manual: Schematic diagrams
Schematic Diagram Canister Canister is filled with charcoal and absorbs evaporated vapor in fuel tank. The gathered fuel vapor in canister is drawn into the intake manifold by the ECM/PCM when appropriate conditions are set. Purge Control Solenoid Valve (PCSV) ...