Kia Cee'd: Engine Control System / Heated Oxygen Sensor (HO2S) Specifications

Kia Cee'd JD Service Manual / Fuel System / Engine Control System / Heated Oxygen Sensor (HO2S) Specifications

Specification

HO2S [Bank 1/Sensor 1]

Item	Specification
Heater Resistance (Ω)	2.4 ~ 4.0 [20°C(68°F)]

HO2S [Bank 1/Sensor 2]

A/F Ratio (λ)	Output Voltage(V)
RICH	0.6 ~ 1.0
LEAN	0 ~ 0.4

Item	Specification
Heater Resistance (Ω)	Approx. 9.0 [21°C(69.8°F)]

Heated Oxygen Sensor (HO2S) Description and operation

Description Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output vol ...

Heated Oxygen Sensor (HO2S) Troubleshooting

Signal Waveform ...

Other information:

Kia Cee'd JD Owners Manual: Rear Seat Entry (For 3-door vehicle only)
To get in or get out of the rear seat, the driver’s or front passenger’s seat should be folded and the seat should be slide. Driver’s seat Front passenger’s seat 1. Fold the front seatback by pulling up the walk-in seat lever and then slide the front seat forward. 2. Set th ...

Kia Cee'd JD Service Manual: Height Adjust Repair procedures
Replacement [5Door, Waggon only] 1. Remove the front seat belt upper anchor. (Refer to Front Seat Belt - "Front Seat Belt Pretensioner") 2. After loosening the mounting bolts, then remove the height adjus ...