Kia Cee'd: Head Lamp Leveling Device / Head Lamp Leveling Switch Repair procedures

Kia Cee'd JD Service Manual / Body Electrical System / Head Lamp Leveling Device / Head Lamp Leveling Switch Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the lower crash pad switch assembly (A) after loosening screws.

Inspection
1.
Remove the lower crash pad switch assembly.

2.
Connect the battery voltage to terminals 3 and the ground to terminal 4.
3.
Measure the voltage between terminals 4 and 2 at each position.
[Switch Position]
 
Position No.
Rotation
Voltage (V) (±5%)
0

10.85
1
15°
9.78
2
30°
9.17
3
45°
8.55
4
60°
7.94
5
75°
7.32
6
90°
6.71

4.
If the voltage is not as specified, replace the head lamp leveling switch.
Schematic diagrams
Circuit Diagram ...

Auto Lighting Control System
...

Other information:

Kia Cee'd JD Service Manual: Rear Wheel Guard Repair procedures
Replacement    • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. ...

Kia Cee'd JD Service Manual: Repair procedures
Adjustment Inspect Glass Alignment 1. Check for abnormal noise or bending during operation. 2. With the sunroof fully closed, check for water leakage. 3. The roof panel (B) should be even with the mova ...

© 2017-2025 www.kceed.com