Kia Cee'd: Warnings and indicators (Instrument cluster) / Glow indicator (Diesel engine)
The indicator light illuminates when the ignition switch is placed at the ON position. The engine can be started after the preheat indicator light goes off. The illuminating time varies with the water temperature, air temperature and battery condition.
✽ NOTICE
If the engine does not start within 10 seconds after the preheating is completed, turn the ignition key once more to the LOCK/OFF position for 10 seconds, and then to the ON position, in order to preheat again.
CAUTION
If the preheat indicator light continues to illuminate or flash on and off after the engine has warmed up or while driving, we recommend that the system be checked by an authorized Kia dealer.
Engine coolant temperature
warning light
The warning light illuminates if the temperature
of the engine coolant is above
120±3°C (248±5.4°F).
Do not continue driving with an overheated
engine. If your vehicle overheats, refer
...
Fuel filter warning light
(Diesel engine)
This warning light illuminates for 3 seconds
after the ignition switch is set to the
ON position and then it will go out. If it
lights up while the engine is running, it
indicates that water ...
Other information:
Kia Cee'd JD Service Manual: Troubleshooting
Troubleshooting
1.
The lamp switch inputs can be checked using the GDS.
2.
To check the input value of lamp switch, select option "Body Control
Module".
3.
To consult the present input/outpu ...
Kia Cee'd JD Service Manual: Engine Mounting Repair procedures
Removal and Installation
[Rollroad mounting]
1.
Rollroad bracket mounting bolts and rollroad bracket (A).
Tightening torque
Nut (B) :
107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m, 79.6 ~ 94.0 lb-ft)
...
