General informationKia Cee'd JD Service Manual: Blower Resistor (Manual) Repair procedures
Inspection
1.
Measure the resistance between the terminals.
2.
If the measured resistance is not within specification, the blower resistor
must be replaced. (After removing the resistor.)
Replacement
...
Kia Cee'd JD Service Manual: Accelerator Pedal Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Disconnect the accelerator position sensor connector (A).
3.
Remove the installation bolt (B) and nut ...