Inspection |
1. |
Turn off the ignition switch.
|
2. |
Disconnect the shift actuator connector (A) and select actuator connector
(B).
|
3. |
Measure the resistance on the gear actuator motor terminal.
|
4. |
Refer to the specifications and check that the measured resistance is
as specified.
(Refer to Gear Actuator Motor - "Specification")
|
Removal |
1. |
Remove the gear actuator assembly.
(Refer to Dual Clutch Transmission Control System - "Gear actuator")
|
Kia Cee'd JD Service Manual: Antenna Coil Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering column shroud panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Disconnect the connector (B) of the coil ...
Kia Cee'd JD Owners Manual: Emergency Stop Signal (ESS)
The Emergency Stop Signal system
alerts the driver behind by blinking the
stop light when the vehicle is braked rapidly
and severely.
The system is activated when:
The vehicle suddenly stops (vehicle
speed is over 55km/h and the vehicle
deceleration at greater than 7 m/s2)
The ABS ...