Kia Cee'd: Fuses / Fuse/relay panel description
- Inner fuse panel
- Engine compartment fuse panel (for gasoline engine MPI, GDI)
- Engine compartment fuse panel (for gasoline engine T-GDI)
- Engine compartment fuse panel (for diesel engine)
- Engine compartment fuse panel (Diesel engine only)
Multi fuse
If the multi fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery cable.
3. Remove the fuse panel on the right
side in the engine compartme ...
Inner fuse panel
Inside the fuse/relay panel covers, you
can find the fuse/relay label describing
fuse/relay name and capacity.
✽ NOTICE
Not all fuse panel descriptions in this
manual may be applicable to ...
Other information:
Kia Cee'd JD Service Manual: Compressor Repair procedures
Removal
1.
If the compressor is marginally operable, run the engine at idle speed,
and let the air conditioning work for a few minutes, then shut the engine
off.
2.
Disconnect the negative cable from the battery.
...
Kia Cee'd JD Service Manual: Auto Light Sensor Repair procedures
Inspection
In the state of IGN1 ON, when multifunction switch module detects auto light
switch on, tail lamp relay output and head lamp low relay output are controlled
according to auto light sensor's input.
The auto light control doesn't work if the pin sunlight s ...
© 2017-2026 www.kceed.com
