Kia Cee'd: Fuel Delivery System / Fuel Pressure Regulator Repair procedures

Removal

1.	Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”)

2.	Disconnect the electric pump & sender wiring connector (A).

3.	Remove the fuel feed tube (A) from the fuel filter after releasing the fixing clip (B).

4.	Remove the plate assembly (C) after removing the cushion pipe fixing hooks (D).

5.	Disconnect the electric pump wiring connector (A) from the pump.

6.	Remove the reservior cup (B) after releasing the fixing hooks (C).

7.	Remove the fuel sender (A) with sliding it downward after releasing the latch (B).

8.	Remove the fuel pressure regulator assembly (A) after releasing the cap (B) and return pipe (C).

Installation

1.	Installation is reserve of removal.

Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the electric pump & sender ...

Removal 1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Release the residual pressure in fuel line. ( ...

Kia Cee'd JD Service Manual: Compressor Components and components location
Components 1. Center Bolt 2. Hub Bolt 3. Hub Assembly 4. Snap Ring 5. Pulley 6. Compressor Assembly 7. Electric Control Valve ...

Kia Cee'd JD Service Manual: Intake Air Temperature Sensor (IATS) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS terminals 3 and 4. 4. Check that the resistance is within ...