Kia Cee'd: Engine Control System / Fuel Pressure Control Valve Repair procedures

Kia Cee'd JD Service Manual / Fuel System / Engine Control System / Fuel Pressure Control Valve Repair procedures

Inspection
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the fuel pressure regulator valve connector.
3.
Measure resistance between the fuel pressure regulator valve terminals 1 and 2.
4.
Check that the resistance is within the specification.
Specification: Refer to “Specification”
Fuel Pressure Control Valve Schematic diagrams
Circuit Diagram ...

ISG (Idle Stop & Go) Components and components location
Components Location   1 . Battery sensor 2 . Brake Booster Vacuum Pressure Sensor (BBVPS) 3 . AGM battery 4 . DC DC converter 5 . ISG OFF switch 6. ...

Other information:

Kia Cee'd JD Service Manual: Blower Resistor (Manual) Repair procedures
Inspection 1. Measure the resistance between the terminals. 2. If the measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor.) Replacement ...

Kia Cee'd JD Service Manual: Cooling Fan Components and components location
Components   1. Cooling fan 2. Fan motor 3. Fan shroud ...

© 2017-2023 www.kceed.com