Kia Cee'd: Engine Control System / Fuel Pressure Control Valve Description and operation

Fuel Pressure Regulator Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on various engine condition.

Variable Intake Solenoid (VIS) Valve Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance ...

Fuel Pressure Control Valve Specifications

Specification   Item Specification Coil Resistance (Ω) 0.5 [20°C(68°F)  ...

Other information:

Kia Cee'd JD Service Manual: Rain Sensor Repair procedures
Inspection Rain Sensing Wiper 1. In IGN2 ON state, if auto switch input (LIN communication) is ON then both wiper low relay and wiper high relay outputs are controlled by the rain sensor input signal. 2. If the wiper switc ...

Kia Cee'd JD Service Manual: Specifications
Specifications   Content Value AFLS Nominal voltage DC 13.5V Max voltage DC 18.5V Operating voltage DC 9.5 ~ 16.5V Operating temperature ...