Removal |
1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”)
|
2. |
Disconnect the electric pump & sender wiring connector (A).
|
3. |
Remove the fuel feed tube (A) from the fuel filter after releasing the
fixing clip (B).
|
4. |
Remove the plate assembly (C) after removing the cushion pipe fixing
hooks (D).
|
5. |
Disconnect the electric pump wiring connector (A) from the pump.
|
6. |
Remove the reservior cup (B) after releasing the fixing hooks (C).
|
7. |
Remove the fuel sender (A) with sliding it downward after releasing
the latch (B).
|
8. |
Remove the fuel pressure regulator assembly (A) after releasing the
cap (B) and return pipe (C).
|
9. |
Extract the fuel filter (A) upward after releasing the fixing hooks
(B).
|
Installation |
1. |
Installation is reserve of removal.
|
Kia Cee'd JD Service Manual: Tail Gate Latch Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with protective
tape, and apply protective tape around the related parts, to
prevent damage.
...
Kia Cee'd JD Owners Manual: Mode selection
The mode selection knob controls the
direction of the air flow through the ventilation
system.
Air can be directed to the floor, dashboard
outlets, or windshield. Six symbols
are used to represent Face, Bi-Level,
Floor, Face / Floor / Defrost, Floor /
Defrost and Defrost air position. ...