Kia Cee'd: ABS(Anti-Lock Brake System) / Front Wheel Speed Sensor Repair procedures

Kia Cee'd JD Service Manual / Brake System / ABS(Anti-Lock Brake System) / Front Wheel Speed Sensor Repair procedures

Removal

Remove the front wheel and tire.

Tightening torque:

88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

Remove the front wheel speed sensor mounting bolt (A).

Tightening torque:

6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

3.	Remove the front wheel guard .

4.	Disconnect the front wheel speed sensor connector (A), and then remove the front wheel speed sensor.

5.	Install in the reverse order of removal.

Front Wheel Speed Sensor Components and components location

Components 1. Front wheel speed sensor 2. Front wheel speed sensor connector ...

Rear Wheel Speed Sensor Components and components location

Components 1. Rear wheel speed sensor 2. Rear wheel speed sensor connector ...

Other information:

Kia Cee'd JD Service Manual: General information
Important Safety Notice Proper service methods and repair procedures are essential for safe, reliable operation of all motor vehicles as well as personal safety of the operator. The service procedures and descriptions in this shop manual provide general directions for a serv ...

Kia Cee'd JD Owners Manual: Changing a tire with TPMS
If you have a flat tire, the low Tire Pressure and Position telltales will come on. We recommend that the system be checked by an authorized Kia dealer. CAUTION We recommend that you use the sealant approved by Kia. The sealant on the tire pressure sensor and wheel shall be eleminated ...