Kia Cee'd: Front Seat / Front Seat Frame Assembly Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Front Seat / Front Seat Frame Assembly Repair procedures

Replacement
  
Put on gloves to protect your hands.
  
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the front seat back cover.
(Refer to Front Seat - "Front Seat Back Cover")
2.
Remove the front seat cushion cover.
(Refer to Front Seat - "Front Seat Cushion Cover")
3.
After loosening the mounting bolts, then disconnect the front seat back frame assembly (A) and front seat cushion frame assembly (B).
Tightening torque :
29.4 ~ 34.3 N.m (3.0 ~ 3.5 kgf.m, 21.7 ~ 25.3 lb-ft)

4.
Install in the reverse order of removal.
  
Remove the side air bag for replacing side air bag installation seat.
Before service, be fully aware of precautions and service procedure relevant to air bag.
Front Seat Frame Assembly Components and components location
Component Location   1. Front seat back frame assembly 2. Front seat cushion frame assembly ...

Rear Seat
...

Other information:

Kia Cee'd JD Owners Manual: Air intake control
The air intake control is used to select the outside (fresh) air position or recirculated air position. To change the air intake control position, press the control button. Recirculated air position With the recirculated air position selected, air from the passenger compartment wi ...

Kia Cee'd JD Owners Manual: OFF
With manual transaxle To turn off the engine (START/RUN position) or vehicle power (ON position), stop the vehicle then press the engine start/stop button. With automatic transaxle/DCT* To turn off the engine (START/RUN position) or vehicle power (ON position), press the engine start/ ...

© 2017-2022 www.kceed.com