Kia Cee'd: Front Seat Belt / Front Seat Belt Pretensioner Repair procedures
• |
When installing the belt, make sure not to damage the pretensioner.
|
|
1. |
Remove the center pillar upper trim.
(Refer to Interior Trim - "Center Pillar Trim")
|
2. |
After loosening the mounting bolt, then remove the front seat belt upper
anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
|
|
3. |
After disconnecting the pretensioner connector lock pin, remove the
front seat belt pretensioner connector (B), loosen the mounting bolts,
then remove the front seat belt pretensioner (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
|
|
4. |
Install in the reverse order of removal.
•
|
Replace any damaged clips.
|
•
|
Make sure the connector is plugged in properly.
|
|
|
[3Door]
• |
When installing the belt, make sure not to damage the pretensioner.
|
|
1. |
Remove the rear inner outer trim.
(Refer to Interior Trim - "Center Pillar Trim")
|
2. |
After loosening the mounting bolt, then remove the front seat belt lower
anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
|
|
3. |
Remove the front seat belt upper anchor cover (A).
|
4. |
After loosening the mounting bolt, then remove the front seat belt upper
anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
|
|
5. |
After disconnecting the pretensioner connector lock pin, remove the
front seat belt pretensioner connector (B), loosen the mounting bolts,
then remove the front seat belt pretensioner (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)
|
|
6. |
Install in the reverse order of removal.
•
|
Replace any damaged clips.
|
•
|
Make sure the connector is plugged in properly.
|
|
|
Component Location
[5Door, Waggon]
1. Front seat belt pretensioner
[3Door]
1. Front seat belt ...
Component Location
[5Door, Waggon only]
1. Height adjust
...
Other information:
Kia Cee'd JD Service Manual: Dynamic Damper Repair procedures
Replacement
1.
Remove the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
2.
Remove the TJ joint assembly.
(Refer to Driveshaft Assembly - “TJ Joint”)
3.
Rem ...
Kia Cee'd JD Service Manual: Description and operation
Description
Evaporative Emission Control System prevents fuel vapor stored in fuel tank
from vaporizing into the atmosphere. When the fuel evaporates in the fuel tank,
the vapor passes through vent hoses or tubes to the canister filled with charcoal
and the canister temporar ...