Replacement |
1. |
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
|
2. |
Disconnect the front seat belt buckle connector wiring (A).
|
3. |
After loosening the mounting bolt, then remove the front seat belt buckle
(A).
|
4. |
Install in the reverse order of removal.
|
Kia Cee'd JD Owners Manual: Speed limiter indicator
The indicator illuminates when the speed
limit control system is enabled by move
the lever up on the steering wheel.
The indicator goes off when the
lever
up again to deactivate the system.
If there is a problem with the speed limit
control system, the “---” indicator will blink. ...
Kia Cee'd JD Owners Manual: Outside light
Rear turn signal light and stop/tail light
1. Turn off the engine.
2. Open the tailgate.
3. Loosen the light assembly retaining
screws with a cross-tip screwdriver.
4. Remove the rear combination light
assembly from the body of the vehicle.
5. Remove the socket from the assembly
by tu ...