Kia Cee'd: Front Seat / Front Seat Assembly Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Front Seat / Front Seat Assembly Repair procedures

Replacement
1.
Remove the front seat track mounting cover (A).
2.
After loosening the mounting bolts, remove the front seat assembly (B).
Tightening torque :
34.3 ~ 53.9 N.m (3.5 ~ 5.5 kgf.m, 25.3 ~ 39.8 lb-ft)

3.
Disconnect the airbag connector (A), power seat & seat warmer connector connector (B), seat belt buckle connector (C), seat belt remind connector (D).
[Driver's]

[Passenger's]

4.
Install in the reverse order of removal.
  
SEAT MOUNTING BOLT INSTALLATION PROCEDURE
Set the seat into the most rearward position. Check that each slide is locked, and then tighten the front mounting bolt temporarily.
Set the seat into most forward position. Check that each slide is locked, and then Tighten the rear mounting bolt completely.
Set the seat into the most rearward position. Check the front mounting bolt completely.
Check that the seat operates to and fro smoothy and the locking portion locks properly.
Front Seat Assembly Components and components location
Component Location   1. Front seat assembly ...

Front Seat Shield Outer Cover Components and components location
Component Location   1. Front seat shield outer cover ...

Other information:

Kia Cee'd JD Owners Manual: Rear window defroster
■ Manual climate control ■ Automatic climate control The defroster heats the window to remove frost, fog and thin ice from the interior and exterior of the rear window, while engine is running. To activate the rear window defroster, press the rear window defroster button lo ...

Kia Cee'd JD Owners Manual: START/RUN
With manual transaxle To start the engine, depress the clutch pedal and brake pedal, then press the engine start/stop button with the shift lever in the N (Neutral) position. With automatic transaxle/DCT To start the engine, depress the brake pedal and press the engine start/stop butt ...

© 2017-2025 www.kceed.com