Kia Cee'd: Body Side Molding / Front Mud Guard Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Body Side Molding / Front Mud Guard Repair procedures

Replacement

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Put on gloves to protect your hands.

•	Take care not to scratch the body surface.

1.	After loosening the mounting screws, then remove the front mud guard (A).

Install in the reverse order of removal.

•	Replace any damaged clips.

Rear Wheel Guard Repair procedures

Replacement • When prying with a flat-tip screwdriver, wrap it with protective ...

Rear Mud Guard Repair procedures

Replacement • When prying with a flat-tip screwdriver, wrap it with protective ...

Other information:

Kia Cee'd JD Service Manual: Hood Latch Components and components location
Component Location 1. Hood latch assembly ...

Kia Cee'd JD Service Manual: Side Impact Sensor (SIS) Description and operation
Description The Side Impact Sensor (SIS) system consists of two front SIS which are installed inside the Center Pillar (LH and RH). They are remote sensors that detect acceleration due to collision at their mounting locations. The primary purpose of the Side Impact Sensor (S ...